Huawei Quidway S1700-24-AC Manual Download Page 119

Page: 119 / 266

Display

Mode

Color

Status

Description

Green

Steady on 10M/100M/1000M port: The port is

operating at 10/100 Mbit/s.
1000M/10GE port: The port is operating

at 1000 Mbit/s.

Green

Blinking

10M/100M/1000M port: The port is

operating at 1000 Mbit/s.
1000M/10GE port: The port is operating

at 10 Gbit/s.

PoE

Off

The port is not providing power to a PD.

Green

Steady on The port is providing power to a PD.

Yellow

Steady on The PoE function is disabled on the port.

Yellow

Blinking

The port stops providing PoE power

because of an exception (for example, an

incompatible PD is connected to the

port).

Green

and

yellow

Blinking

green

and

yellow

alternatel

● The power of the PD exceeds the

maximum power or power threshold

of the port.

● The total power consumption of PDs

has reached the maximum power of

the switch.

● The manual power management

mode is used and the port is not

enabled to provide power to the PD.

Power Supply Configuration

The S1720-28GWR-PWR-4X has a built-in power module and does not support

pluggable power modules. The built-in power module can provide 370 W PoE

power, which ensures full PoE power on 24 ports in compliance with 802.3af or on

12 ports in compliance with 802.3at.

Heat Dissipation

The S1720-28GWR-PWR-4X has two built-in fans for forced air cooling. The

airflow direction is left-to-right.

Technical Specifications

Table 5-27

lists technical specifications of the S1720-28GWR-PWR-4X.

S1700 Managed Series Ethernet Switches

Product Description

5 Hardware Structure

Issue 18 (2020-10-23)

Summary of Contents for Quidway S1700-24-AC











































































































































































































































































Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands

Huawei Quidway S1700-24-AC, Manual

Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands