3.4.3 Installing Ethernet Adapters
This section describes how to install Ethernet adapters.
Installing a Shielded Ethernet Connector
This section describes how to install a shielded Ethernet connector.
Procedure
Step 1
Hold the male and female connectors, with the male connector facing the female connector, as
shown in
.
Figure 3-53
Holding the male and female connectors
Step 2
Insert the male connector into the female connector, as shown in
.
Figure 3-54
Feeding the male connector into the female connector
Step 3
Pull the connector slightly and ensure that it is securely connected.
HUAWEI NetEngine80E Router
Installation Guide
3 On-site Cable Assembly and Installation
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50