CAUTION
To protect the device and trace the cause, transfer the unpacked device indoors to ensure proper
storage. Take photographs of the storage site, the device that is rusted or corroded, the related
package container, and the package materials. Collect the photos and file them. Preserve the
package container and package materials that are unpacked.
----End
2.3.2 Unpacking the Wooden Case
In general, wooden cases are used to pack heavy goods such as racks, cabinets and batteries.
The package for a cabinet consists of wooden panels, steel edges, tongues, and foam plates. If
possible, move the wooden case into or near the equipment room, and then unpack the cabinet
to avoid damaging the cabinet during transportation.
Prerequisite
CAUTION
l
When carrying the cabinet, always hold the stronger part of the cabinet, such as the support
or the rack. Do not exert force on the parts that are relatively weak, such as the cable support
or the cable fixing beam. Otherwise, the cabinet may get damaged or accidents may occur.
Remove the backing blocks from the rack only after the cabinet is carried to the installation
site. The same is to avoid damaging signal cables and boards when carrying the cabinet.
l
The wooden case must be positioned correctly. Do not place the wooden case upside down.
Otherwise, the device can get damaged severely.
Procedure
Step 1
Wear protective gloves.
Step 2
Place the wooden case in an even manner on the ground, and make sure that the side with the
pallet faces downwards.
Step 3
Insert one end of the spanner into the hole of the tongue on the cover of the wooden case. Lift
the spanner to straighten the tongue, as shown in
. You can also use a screwdriver or
a claw hammer to straighten the tongue.
HUAWEI NetEngine80E Router
Installation Guide
2 Preparing for the Installation
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12