2.3.1 Checking the Package Container
Before unpacking and checking the products, check whether the package container is intact.
Procedure
Step 1
Unload the products.
CAUTION
When unloading the products, place the package containers in order. Make sure that the product
labels on the package containers are in the same direction. This facilitates the checking.
Step 2
After unloading the products, check whether the total number of the products are the same as
the number indicated on the
Packing List
. Check whether the destination of delivery is the same
as the actual site for installation.
Condition
Action
The total number of products are the same as
the number indicated on the
Packing List
, and
the products are delivered to the correct
destination.
Perform
The total number of products are different
from the number indicated on the
Packing
List
, or the products are delivered to the
wrong destination.
Perform
Step 3
The engineering supervisor must send the
Cargo Inspection Feedback Form
that is confirmed
and signed by the customer to the order management engineer in the local Huawei representative
office within three days. At the same time, stop unpacking the products.
Step 4
Check whether the exterior of the package container is intact. Check whether the package
container is placed correctly during transportation.
Condition
Action
The external package is intact.
Unpack and check the products.
The exterior of the package container is
seriously damaged or shows signs of water
penetration.
Perform
Step 5
Stop unpacking the products, trace the cause, report the problem to the order management
engineer of the local Huawei representative office, and wait for further assistance.
HUAWEI NetEngine80E Router
Installation Guide
2 Preparing for the Installation
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
