Installation Manual
Quidway R2600/3600 Series Modular Routers
Chapter 5
Startup and Configuration
5-8
no shutdown
no ip address
no ipx network
End
VI. Confirming the configuration
Use this configuration? [yes/no]:
Now writing the configuration to flash memory.
Write the running config to flash memory successfully.
Please reboot the router.
5.2 Configuration Basic
5.2.1 Basic Configuration Mode
The command lines for R2600/3600 series are hierarchically protected to prevent
unauthorized users from accessing it. It provides a rich diversity of command modes
and the three most basic modes are:
z
Normal
mode
z
Privileged
mode
z
Global
mode
Note:
For the details about configuration commands and command line interfaces, refer to V
RP User Manual -
Configuration Guide (V1.5)
.
Table 5-1
Feature list for basic command modes
Command
mode
Feature
Prompt
Entry command
Exit command
Normal
mode
View the simple running
states and statistics of the
router
Quidway>
Access the mode
after connection
with the router is
created.
Enter
<exit>
to
disconnect the
connection from the
router
Privileged
mode
View the entire running states
and statistics of the router.
File management and system
management can be
performed at the same time
Quidway#
Enter
<enable>
in
normal mode and
access the mode
after entering the
correct enable
password (no
password is set for
the router by
default).
Enter
<disable>
to
return to the normal
mode.
Enter
<exit>
to
disconnect the
connection from the
router and return to
the normal mode
Global
mode
Configure global parameters
Quidway(config)#
In privileged
mode, enter
<config>
Enter
<exit>
to return
to privileged mode
Note:
In general, for a certain mode, only the command defined by this mode can be executed.
