The output of TAL options is enabled, and the corresponding TAL option template is
sent to the NSC.
By default, the output of TAL options is disabled.
2.
Run:
ip netstream export template option
{
refresh-rate
packet-number
|
timeout-
rate
timeout-interval
}
The packet interval and time interval at which the TAL option template is refreshed
are set.
TAL option packets are separately output to the NSC in V9 format. To ensure that the
NSC can successfully parse the TAL option packets, it is required that the
corresponding TAL option template be sent to the NSC.
The TAL option template can be refreshed at both the fixed packet and time intervals.
Packet and time intervals can both be configured, without affecting each other.
–
refresh-rate
packet-number
: indicates that the TAL option template is refreshed
at the fixed packet interval.
–
timeout-rate
timeout-interval
: indicates that the TAL option template is refreshed
at the fixed time interval.
By default, the TAL option template is refreshed at intervals of 20 packets and 30
minutes.
----End
Checking the Configuration
Run the following commands to check the previous configuration.
After packet statistics collection and output of NetStream flows are configured, run the
display
ip netstream export option
command in any view. You can view information about the output
option template.
<HUAWEI>
display ip netstream export option
------------------------------------------------------
Option Data Succeeded Failed
------------------------------------------------------
l3vpn 100 0
6.10 Maintaining NetStream
This section describes how to maintain NetStream.
6.10.1 Aging Original Flows Forcibly
Original flows in the buffer in a specified slot can be aged forcibly so as to output original flows
or generate aggregated flows.
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
6 NetStream Configuration
Issue 01 (2011-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
176
