manualshive.com logo in svg

Huawei NetEngine5000E, Configuration Manual

Share
Download
Huawei NetEngine5000E Configuration Manual Download Page 110

The system view is displayed.

Step 2

Run:

info-center filter-id

 { 

filter-id

 | 

bymodule-alias

 

modname

 

alias

 } 

One or multiple logs specified in this command are filtered out. Log IDs or alias names in this
command must be separated by spaces.

Step 3

Run:

commit

The configuration is committed.

----End

4.4 Setting the Maximum Number of Logs to Be Displayed

This section describes how to set the maximum number of logs to be displayed.

Applicable Environment

The system logs information about device operations in real time. You can view logs in the log
buffer to understand what happened during system operations.

Pre-configuration Tasks

Before setting the maximum number of logs to be displayed, complete the following tasks:

l

Making sure that the device is powered on

l

Ensuring that the device self-check succeeds

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

info-center logbuffer

 

size

 

buffersize

The maximum number of logs to be displayed is set.

By default, a maximum of 512 logs are displayed.

----End

Checking the Configuration

Run the 

display logbuffer

 [ 

starttime

 

starttime-value

 [ 

endtime

 

endtime-value

 ] | 

level

severity

 | 

size

 

value

 ] 

*

 command to view logs.

<HUAWEI> 

display logbuffer size 5

May  1 2011 19:20:32 HUAWEI %%01ftpc/7/FTPC_SMPOI_USER_LOGIN(l):VR=0-
CID=2157193000;FTPC Component received new user login notification.
May  1 2011 19:20:32 HUAWEI %%01ftpc/7/FTPC_MSG_RCVD_TYPE(l):VR=0-
CID=2157193000;FTPC Component received a message (type  4).

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management

4 Log Management

Issue 01 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

102

Summary of Contents for NetEngine5000E












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands