Huawei NetEngine5000E, Configuration Manual

Page: 108 / 203

Table 4-2 Log severity levels
Severit
y Value Severity
Level Description
0 Emergency System is unusable: A fatal fault occurs in the device, such as an
abnormally running program or unauthorized use of memory.
The system must restart.
1 Alert Action must be taken immediately: A serious fault occurs in a
device, such as memory usage reaching the upper limit. The fault
needs to be rectified immediately.
2 Critical Critical conditions: A critical fault occurs, such as memory usage
reaching the lower limit, the temperature reaching the lower
limit, BFD detecting an unreachable device, or an internal fault
in a device. The fault needs to be located and rectified.
3 Error Error conditions: A fault caused by an incorrect operation or
process occurs, such as an incorrect protocol packet received
from another device, a wrong command, or a wrong password.
4 Warning Warning conditions: An exception occurs, such as disabling of
a routing process, packet loss detected by BFD, or receipt of a
wrong protocol packet.
5 Notice Normal but significant conditions: A key operation is performed
to keep a device run properly, such as running the
shutdown
command, neighbor discovery, or status change of the protocol
state machine.
6 Informational Informational messages: A common operation is performed to
keep a device run properly, such as running the
display
command.
7 Debugging Debug-level messages: A routine operation is performed, and no
action is required.
Log Format
Figure 4-1 shows the format in which logs are output.
Figure 4-1 Log format
<Int_16>TIMESTAMP HOSTNAME %%ddAAA/B/CCC(l):VR=X-CID=ZZZ; YYYY
Table 4-3 describes the fields in a log.
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
4 Log Management
Issue 01 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100