Different terminal users can share the same alarm filtering table, but each terminal user can use
only one alarm filtering table.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
alarm
The alarm management view is displayed.
Step 3
Run:
mask name
mask-name
The alarm filtering table view is displayed.
Step 4
You can choose one or more of the following commands to filtering out specific alarms:
l
Run the
mask alarm-name
alarm-name
command to filter out a specific alarm.
To filter out multiple alarms with specific names, you need to run this command multiple
times. Run the
undo mask alarm-name
alarm-name
command to cancel the configuration.
l
Run the
mask feature-name
feature-name
command to filter out an alarm for a specific
service.
To filter out multiple alarms for specific services, you need to run this command multiple
times. Run the
undo mask feature-name
feature-name
command to cancel the
configuration.
l
Run the
mask severity
severity
command to filter out an alarm with specific severity.
The severity of an alarm can be Critical, Major, Minor, or Warning. To filter out multiple
alarms with specific levels of severity, you need to run this command multiple times. Run
the
undo mask severity
severity
command to cancel the configuration.
Step 5
Run:
quit
Return to the alarm management view.
Step 6
Choose one of the following commands based on the specific terminal user type and function.
l
Command line users run the
terminal mask name
mask-name
command to filter out specific
alarms.
l
NMS users on the host named
host-name
run the
snmp target-host
host-name
mask
name
mask-name
command to filter out specific alarms.
Step 7
Run:
commit
The configuration is committed.
----End
5.3.6 Saving Alarms to a Log File
This section describes how to save alarms to a log file.
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
5 Fault Management
Issue 01 (2011-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
