Huawei NetEngine5000E Configuration Manual Download Page 109

Page: 109 / 203

Table 4-3

Log fields

Field

Name

Description

<Int_16>

Leading character

Indicates that a log will be sent to a log host. A log
to be saved on a local device does not have a
leading character.

TIMESTAMP Timestamp

Indicates the time when a log is output. The value
is in the yyyy-mm-dd hh:mm:ss format:

yyyy-mm-dd indicates the date.

hh:mm:ss indicates the time. The value of hh
(hour) ranges from 00 to 23.

The timestamp and the host name are separated by
a space.

HOSTNAME

Host name

By default, it is HUAWEI.

Huawei identifier

Indicates that the log is output by a Huawei
product.

Version number

Indicates the version of the log format.

AAA

Module name

Indicates the name of the module that outputs the
log to the information center.

Log severity level

Indicates the log severity value.

CCC

Description

Describes the log type.

(l)

Information type

Identifies a user log.

VR=X-
CID=ZZZ

Virtual router
information

X: virtual router ID.
ZZZ: component ID.

YYYY

Descriptor

Indicates the log contents that are output to the
information center by each module. The descriptor
is filled in by each module every time a log is
output.

4.3 (Optional) Filtering Logs

This function allows you to filter out specified logs.

Context

After a specified log is filtered out, the router no longer records or displays this log, or outputs
this log to a log host.

Procedure

Step 1

Run:

system-view

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management

4 Log Management

Issue 01 (2011-10-15)

Huawei Proprietary and Confidential

101

Summary of Contents for NetEngine5000E












































































































































































































Search results

Summary of Contents for NetEngine5000E

Reviews:

Brands by name

Popular brands

Huawei NetEngine5000E, Configuration Manual

Search results

Summary of Contents for NetEngine5000E

Reviews:

Brands by name

Popular brands