Huawei ME909s Series Hardware Manual Download Page 43

Page: 43 / 76

HUAWEI ME909s Series LTE Mini PCIe Module
Hardware Guide

Electrical and Reliability Features

Issue 02 (2016-09-07)

Huawei Proprietary and Confidential

Electrical and Reliability Features

5.1 About This Chapter

This chapter describes the electrical and reliability features of the interfaces in the
ME909s Mini PCIe module, including:



Absolute Ratings



Operating and Storage Temperatures



Power Supply Features



Reliability Features



EMC and ESD Features

5.2 Absolute Ratings

Table 5-1 lists the absolute ratings for the ME909s Mini PCIe module. Using the
module beyond these conditions may result in permanent damage to the module.

Table 5-1

Absolute ratings for the ME909s Mini PCIe module

Symbol

Specification

Min.

Max.

Unit

VCC_3V3

External power voltage

–0.3

4.5

5.3 Operating

and Storage Temperatures

Table 5-2 lists the operating and storage temperatures for the ME909s Mini PCIe
module.

Summary of Contents for ME909s Series













































































Search results

Summary of Contents for ME909s Series

Reviews:

Related manuals for ME909s Series

Brands by name

Popular brands

Huawei ME909s Series, Hardware Manual

Search results

Summary of Contents for ME909s Series

Reviews:

Related manuals for ME909s Series

Brands by name

Popular brands