Huawei ME909s Series Hardware Manual Download Page 40 | Manualshive

Page: 40 / 76

background image

HUAWEI ME909s Series LTE Mini PCIe Module
Hardware Guide

RF Specifications

Issue 02 (2016-09-07)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

40



The antenna consists of the antenna body and the relevant RF transmission cable. Take the
RF transmission cable into account when measuring any of the preceding antenna
indicators.



Huawei cooperates with various famous antenna suppliers who are able to make
suggestions on antenna design, for example, Amphenol, Skycross, etc.

4.5.2

Interference

Besides the antenna performance, the interference on the user board also affects the
radio performance (especially the TIS (Total Isotropic Sensitivity)) of the module. To
guarantee high performance of the module, the interference sources on the user
board must be properly controlled.

On the user board, there are various interference sources, such as the LCD, CPU,
audio circuits, and power supply. All the interference sources emit interference signals
that affect the normal operation of the module. For example, the module sensitivity
can be decreased due to interference signals. Therefore, during the design, you need
to consider how to reduce the effects of interference sources on the module. You can
take the following measures: Use an LCD with optimized performance; shield the LCD
interference signals; shield the signal cable of the board; or design filter circuits.

Huawei is able to make technical suggestions on radio performance improvement of
the module.

4.5.3

Antenna Requirements

The antenna for ME909s Mini PCIe module must fulfill the following requirements:

Antenna Requirements

Frequency range

Depending on frequency band (s) provided by the
network operator, the customer must use the most
suitable antenna for that/those band (s)

Bandwidth of primary
antenna

ME909s-821

250 MHz in UMTS Band 1; LTE Band 1

170 MHz in GSM 1800; LTE Band 3

70 MHz in UMTS Band 5;

80 MHz in GSM 900; UMTS Band 8; LTE Band 8

130 MHz in UMTS Band 9

50 MHz in LTE Band 38

40 MHz in LTE Band 39

100 MHz in LTE Band 40

194 MHz in LTE Band 41

15 MHz in TD-SCDMA Band 34

40 MHz in TD-SCDMA Band 39

ME909s-120

250 MHz in UMTS Band 1; LTE Band 1

140 MHz in GSM 1900; UMTS Band 2; LTE Band 2

170 MHz in GSM 1800; LTE Band 3

«
...
38
39
40
41
42
...
»

Summary of Contents for ME909s Series













































































Reviews:

No comments

Related manuals for ME909s Series

Brand: S&C Pages: 40

Brand: Samson Pages: 92

Brand: Jafar Pages: 10

Brand: Bang & Olufsen Pages: 80

Brand: Bang & Olufsen Pages: 13

Brand: CALEFFI Pages: 12

QuickSetter+ 132 Series

Brand: CALEFFI Pages: 5

Brand: dbx Pages: 52

Brand: Hankscraft Runxin Pages: 58

Brand: jbc Pages: 44

Brand: jbc Pages: 8

Brand: Zamel Pages: 2

Brand: Zamel Pages: 2

Brand: Zamel Pages: 2

Brand: Omnex Pages: 9

Brand: Omegon Pages: 6

Brand: WATERLOO Pages: 8

TEMP2000 Series

Brand: Samwontech Pages: 91

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands