7.2 Setting IP Filter Parameters
You can use the IP filter function to allow or deny the access of IP data packets coming from
a specified IP network segment, port, or using a specified protocol, to the IPC.
Context
l
An IP address segment is obtained by performing a logical-AND of the IP address and
subnet mask.
l
A maximum of three IP filter rules can be added.
Procedure
Step 1
Choose
Settings
>
Network Configuration
>
IP Filter
.
The
IP Filter
page is displayed, as shown in
.
Figure 7-4
IP Filter page
Step 2
To enable the IP filter function, select
Enable
.
Step 3
Select an IP filter rule as required from the drop-down list box.
The IP filter rule has two options:
Deny
and
Allow
, that is, denying or allowing the access of
IP data packets coming from a specified IP network segment, port, or using a specified
protocol, to the IPC.
Step 4
Click
Add
.
Step 5
Set
IP address
,
Subnet mask
,
Port range
, and
Protocol type
in the
Add filter rule
page, as
shown in
.
Figure 7-5
Add filter rule page
IPC6122-P
Configuration Guide
7 Setting Network Parameters
Issue 02 (2016-04-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50
