l
Switch configuration (such as VLAN configuration of Ethernet switches and zoning
configuration of FC switches)
For details, see the configuration guide of the switch you use.
l
LUN configuration in the FC disk array
For details, see the configuration guide of the FC disk array you use.
l
NIC port numbers
–
If Windows is used, query the port numbers in the network sharing center.
–
If VMware ESXi is used, run the
esxcli network nic list
command on the CLI.
–
If Linux is used, run the
ifconfig -a
command on the CLI.
l
WWPN of the NIC
–
If Windows is used, use the HBA card management tool to query the WWPN.
–
If VMware ESXi is used, run the
esxcli storage san fc list
command on the CLI.
–
If Linux is used, run the
cat /sys/class/fc_host**/port_name
command.
l
NIC bus information
On the CLI, run the
lspci|grep -i eth
command to query the NIC chip name, and obtain
the bus number based on the NIC chip name.
Step 2
Power off the compute node.
Step 3
Remove the compute node.
Step 4
Place the compute node on the ESD workstation.
Step 5
Remove the cover.
.
Step 6
Determine the position of the mezzanine card.
FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
4 Parts Replacement
Issue 06 (2019-08-10)
Copyright © Huawei Technologies Co., Ltd.
68
