manualshive.com logo in svg

Huawei FusionServer Pro CH121 V5 V100R005, Maintenance And Service Manual

Introducing the Huawei FusionServer Pro CH121 V5 V100R005, a cutting-edge server designed for seamless performance. Ensure top-notch maintenance and service with our comprehensive Maintenance and Service Manual, available for free download at manualshive.com. Accessible, informative, and essential for optimizing your server's potential.

Share
Download
background image

12.9.2 Disabling VMD

Procedure

Step 1

Access the BIOS interface.

Step 2

Choose 

Advanced

.

Step 3

Select 

Socket Configuration

 and press 

Enter

.

Step 4

Select 

IIO Configuration

 and press 

Enter

.

Step 5

Select 

Intel(R) VMD Technology

 and press 

Enter

.

Step 6

Select 

Intel(R) VMD Config

 and press 

Enter

.

Step 7

Select 

Disabled

 and press 

Enter

.

Step 8

Press 

F10

.

The 

Save Changes&Exit

 dialog box is displayed.

Step 9

Select 

Yes

 and press 

Enter

.

The server automatically restarts for the settings to take effect.

----End

12.10 Clearing Data from a Storage Device

Scenarios

Use the Linux 

badblocks

 command to clear data on a storage device. Parameters are specified

to overwrite data on the storage device.

The following describes how to clear the data on one HDD/SSD as an example. This
operation is for reference only. You can also use other methods to clear data from storage
media.

The cleared data cannot be restored. Exercise caution when performing this operation.

Procedure

NOTE

Before performing this operation, check that:

l

The storage device is not in a RAID array with redundancy, and the server operating system is
running properly.

l

You have obtained the server No. and the slot No. and location of the storage device to be cleared.

Step 1

You have accessed the desktop of the server where the target drive is located.

For details, see 

12.7.1 Using the Remote Virtual Console

.

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide

12 Common Operations

Issue 06 (2019-08-10)

Copyright © Huawei Technologies Co., Ltd.

175

Summary of Contents for FusionServer Pro CH121 V5 V100R005

































































































































































































Reviews:

No comments

Related manuals for FusionServer Pro CH121 V5 V100R005

Aastra CNX Product Brief preview
CNX
Brand: Aastra Pages: 2
JB Systems Scene Master Operation Manual preview
Scene Master
Brand: JB Systems Pages: 24
JB Systems CMX 24 User Manual preview
CMX 24
Brand: JB Systems Pages: 61
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
QNAP QMiroPlus-201W Quick Installation Manual preview
QMiroPlus-201W
Brand: QNAP Pages: 20
Ratoc Systems SmartMedia Adapter PC Card REX-SMA01F Product Manual preview
SmartMedia Adapter PC Card REX-SMA01F
Brand: Ratoc Systems Pages: 75
Edge-Core SDW100 Quick Start Manual preview
SDW100
Brand: Edge-Core Pages: 7
SeaLevel 7406e User Manual preview
7406e
Brand: SeaLevel Pages: 17
Broadcom Brocade X6-8 Director Hardware Installation Manual preview
Brocade X6-8 Director
Brand: Broadcom Pages: 207
Juniper ACX2000 Hardware Manual preview
ACX2000
Brand: Juniper Pages: 190
ZALMAN ZM-MFC1 Combo User Manual preview
ZM-MFC1 Combo
Brand: ZALMAN Pages: 7
TwinMOS Octopus G Series User Manual preview
Octopus G Series
Brand: TwinMOS Pages: 29
Selta Alyseo 106 User Manual preview
Alyseo 106
Brand: Selta Pages: 83
IBM EtherLink XL User Manual preview
EtherLink XL
Brand: IBM Pages: 72
Gundermann VIDEOWALL LEDWALL Optimizer HQ P2 Manual preview
LEDWALL Optimizer HQ P2
Brand: Gundermann VIDEOWALL Pages: 12
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Brand: Tripp Lite Pages: 2
ETAS XETK-S22.0 User Manual preview
XETK-S22.0
Brand: ETAS Pages: 84

Brands by name

Popular brands

Load more brands