Huawei F01T500, Quick Installation Manual

Page: 43 / 85

38
6 Routing Cables
6.3 Connecting Power Cables(RPS Power Supply)
Use the impact tool to wire the wires from the external copper cable into the exchange side terminal blocks
on the cord patching side according to ”Diagram of Cable Connections Between the RPS and MDF”. (The
following figure uses 2- to-1 wire pair connection as an example. ).
Install short-circuiting plugs on the cable side
terminal blocks and protective units on the
exchange side terminal blocks.
Place the cover back and fasten captive screws.
-190 V
Short-circuit plug
Protective unit
Cable side terminal block
Wires of the RPS external copper cable
Wires of the RPS external copper cable
Exchange side
terminal block
-190 V
+190 V
+190 V