manualshive.com logo in svg

Huawei BM2022, User Manual

The Huawei BM2022 user manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and information to help you maximize the potential of your Huawei BM2022 device. Get your copy now and unleash the full potential of your device with ease.

Share
Download
background image

 Chapter 12 Maintenance

BM2022 Users Guide

191

This screen contains the following fields:

12.22  Reboot

Use this screen to perform a software restart of the WiMAX Device. You may log in again within a 
few minutes of using the reboot button.

Click 

Maintenance > Reboot

 to open this screen as shown next.

Figure 115   

Reboot Screen

This screen contains the following fields:

Table 96   

About

LABEL

DESCRIPTION

System Model 
Name

This field displays the BM2022 system name. It is used for identification. 

Software Version

This field displays the Web Configurator software version that the BM2022 is 

currently running.

CROM Version

This field displays the CROM version number.

Firmware Version

This field displays the current version of the firmware inside the device.

Firmware Date

This field displays the date the firmware version was created. 

Bootloader 
Version

This field displays the bootloader version.

Table 97   

Reboot

LABEL

DESCRIPTION

Reboot

Click this button to have the device perform a software restart. The 

Power

 LED 

blinks as it restarts and the shines steadily if the restart is successful.

Note: Wait one minute before logging back into the BM2022 after a restart.

Summary of Contents for BM2022



























































































































































































































































































Reviews:

No comments

Related manuals for BM2022

Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Brand: Barco Pages: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Brand: Barco Pages: 5
IEI Technology WSB-H610 User Manual preview
WSB-H610
Brand: IEI Technology Pages: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Brand: IEI Technology Pages: 71
Xilica Audio Design neutrino series Quick Start Manual preview
neutrino series
Brand: Xilica Audio Design Pages: 26
ETAS FETK-S2.1 User Manual preview
FETK-S2.1
Brand: ETAS Pages: 69
SMART MOD IIC Installation And Service Manual preview
MOD IIC
Brand: SMART Pages: 15
MikroTik RouterBOARD Groove Quick Setup Manual And Warranty Information preview
RouterBOARD Groove
Brand: MikroTik Pages: 4
SUNRICH TECHNOLOGY C-330 User Manual preview
C-330
Brand: SUNRICH TECHNOLOGY Pages: 5
FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
IDT DBP 7+4 User Manual preview
DBP 7+4
Brand: IDT Pages: 93
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
IBM System Storage DS3200 Overview preview
System Storage DS3200
Brand: IBM Pages: 2
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Brand: ETAS Pages: 82
Riverbed SteelCentral AppResponse 2180 Upgrade And Maintenance Manual preview
SteelCentral AppResponse 2180
Brand: Riverbed Pages: 82
MEDIATEK MT6252 Design Manual preview
MT6252
Brand: MEDIATEK Pages: 166
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
Crown PIP-AF Owner'S Manual preview
PIP-AF
Brand: Crown Pages: 7

Brands by name

Popular brands

Load more brands