Huawei BM2022 User Manual Download

Page: 59 / 282

Chapter 5 System Status

BM2022 Users Guide

WAN

Status

This field indicates the status of the WAN connection to the BM2022.

MAC Address

This field indicates the MAC address of the port making the WAN connection on
the BM2022.

IP Address

This field indicates the current IP address of the BM2022 in the WAN.

Subnet Mask

This field indicates the current subnet mask on the WAN.

Gateway

This field indicates the IP address of the gateway to which the BM2022 is
connected.

MTU

This field indicates the Maximum Transmission Unit (MTU) between the BM2022
and the ISP servers to which it is connected.

DNS

This field indicates the Domain Name Server (DNS) to which your BM2022 is
connected.

LAN

MAC Address

This field indicates the MAC address of the port making the LAN connection on
the BM2022.

IP Address

This field displays the current IP address of the BM2022 in the LAN.

Subnet Mask

This field displays the current subnet mask in the LAN.

MTU

This field indicates the Maximum Transmission Unit (MTU) between the BM2022
and the client devices to which it is connected.

VOIP Phone

Account1
Subscriber

This field displays the SIP number for the SIP account.

Registered
Status

This field displays whether the SIP account is already registered with a SIP
server (

Disabled

Phone1 Status

This field displays whether the phone line (mapping to the

VoIP

port) is in use

or not (idle).

Table 10

Status (continued)

LABEL

DESCRIPTION

Summary of Contents for BM2022



























































































































































































































































































Search results

Summary of Contents for BM2022

Reviews:

Related manuals for BM2022

Brands by name

Popular brands

Huawei BM2022, User Manual

Search results

Summary of Contents for BM2022

Reviews:

Related manuals for BM2022

Brands by name

Popular brands