Wireless Connection Mode
Step 1
By default, STAs search for the WLAN
HUAWEI-XXXX
within the wireless signal coverage
of a Fat AP. STAs can access the WLAN without entering the password. If the SSID and
password have been configured, use the specified SSID and password to set up a wireless
connection.
Step 2
Start the CLI on the STA and access the IP address
192.168.1.1
of the device using STelnet
V2.
Step 3
Enter the user name and password as prompted to log in to the user interface.
----End
Method of Obtaining Upgrade and Configuration Documentation
To perform subsequent upgrades and configurations after login to the device, visit Huawei
enterprise technical support website
http://support.huawei.com/enterprise
product documentation by keyword. The search method is described as follows:
l
Fit AP:
–
Upgrade: Search for
Fit AP upgrade guide
, and refer to the upgrade guide in the
documentation of the correct version.
–
Configuration: Search for
AC6605 product documentation
, and refer to the
configuration guide in the documentation of the correct version.
l
Fat AP:
–
Upgrade: Search for
Fat AP upgrade guide
, and refer to the upgrade guide in the
documentation of the correct version.
–
Configuration: Search for
Fat AP product documentation
, and refer to the
configuration guide in the documentation of the correct version.
l
cloud AP:
–
Upgrade: Search for
cloud AP upgrade guide
, and refer to the upgrade guide in the
documentation of the correct version.
–
Online configuration: Search for
cloud AP product documentation
, and refer to
the configuration guide in the documentation of the correct version.
–
Service configuration after APs go online: Search for
CloudCampus solution
product documentation
, and refer to the deployment guide in the documentation
of the correct version.
3.2 Logging In to the Device Through the Web System
The built-in web system allows you to use a browser to log in to the device. You can
configure, manage, and maintain a Fat AP and cloud AP on the GUI. On the web page, you
are prompted to configure and manage a Fit AP on the AC.
Device connections are classified into wired and wireless connections.
l
In versions earlier than V200R007C20, APs support wired connections.
l
In V200R007C20 and later, Fat APs support both wired and wireless connections, and
Fit APs and cloud APs support wired connections.
AP4050DN-E
Hardware Installation and Maintenance Guide
3 Logging In to the Device
Issue 05 (2018-02-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
