HTC TyTN, User Manual

Page: 110 / 204

110 Getting Connected
3. To use your device as a GPRS modem, set the GPRS Access point
name . To do so, tap Menu > APN Setting and enter the access point
name.
4. Point your device at the infrared port of your notebook, or plug in the
USB cable adapter between your device and the notebook.
5. Tap Menu > Start .
6. The next thing to do is to add your device as an infrared or USB
modem onto your notebook.
To add your device as an infrared modem to your notebook
1. After you tap Menu > Start on the Wireless Modem screen of your
device, the Found New Hardware dialog box will then appear on
your notebook and will show that your device has been detected
as an infrared modem. In this dialog box, make sure that
Install the
software automatically (Recommended) is selected then click
Next
.
2. Wait for Windows to finish installing the infrared modem, then click
Finish .
3. You can now connect your computer to the Internet. Follow the steps
in “To dial up and connect to the Internet.”
To add your device as a USB modem to your computer
1. After you tap Menu > Start on the Wireless Modem screen of your
device, your computer will automatically detect that your device
has been connected. The Found New Hardware dialog box will then
appear on your computer.
2. In the Found New Hardware dialog box, select Install from a list or
specific location (Advanced) and click Next .
3. Select Search for the best drivers in these locations .
4. Insert the Getting Started Disc into your CD drive. Select the Include
this location in the search check box. Click Browse and choose the
CD drive and root folder where the modem driver is located, then click
Next .
5. Wait for the installation to complete, then click Finish .
6. Click Start > Settings > Control Panel .