HTC Touch NIKI100, User Manual

Page: 49 / 240

Getting Started 49
Connections tab
Icon Description
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Comm Manager Manage your device’s connections (including GPRS/3G,
Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/
vibration mode, enable or disable the Direct Push function, and more.
Connection Setup Configure your device’s data connections, such
as GPRS, WAP, and MMS, based on the detected or selected network
operator. See Chapter 10 for details.
Connections
Set up one or more types of modem connections for your
device, such as phone dial-up, GPRS, and more, so that your device can
connect to the Internet or a private local network.
CSD Line Type
Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
GPRS Setting Set the GPRS authentication method.
HSDPA
Turn on or off High Speed Data Packet Access (HSDPA), a 3.5G
high-speed digital data service that provides downstream data rates up
to 3.6 Mbps. Your wireless service provider must support this feature to
be able to turn it on.
Network Cards
Set up your device's network card.
SMS Service
Set your device to send SMS text messages via a data
connection, such as GPRS or a circuit-switched connection.
USB to PC
Set a USB serial connection between your device and PC
when there are problems connecting ActiveSync.