HTC SAPP300, User Manual

Page: 199 / 214

Managing your Phone 199
If you want to prevent your phone from automatically downloading any OTA
updates when you’re not in your home country, you should disable data roaming
on your phone before travelling abroad.
When data roaming is disabled, you will not be able to access the Internet using
a data connection or use any other data services on your phone while you’re out
of your wireless service provider’s coverage area. For more information on how to
enable or disable data roaming, see “To enable data roaming” earlier in this chapter.
11.5 Performing a Factory Data Reset
Performing a factory data reset deletes all data, including downloaded applications,
and resets the phone back to its initial state—the state before you turned on the
phone for the first time.
Important
Make sure to back up important data you have on the phone before you
perform a factory data reset.
To perform a factory data reset
1.
Press HOME > MENU, then touch
Settings
.
2.
Scroll down the screen, then touch
SD card & phone storage
.
3.
Navigate to the Internal phone storage section, then touch
Factory data
reset .
4.
On the Factory data reset screen, touch
Reset phone
and then touch
Erase
everything
.
To perform a factory data reset using phone buttons
1.
With the phone turned off, press and hold the HOME and END CALL/POWER
buttons until you see the screen with an exclamation point image.
2.
Press the HOME and SEND buttons.
Tip
If your phone hangs or freezes, remove the battery then wait for a few seconds, and
then re-install it. After re-installing the battery, turn on the phone.