HTC 99HEJ116-00 - Touch Diamond Smartphone 4 GB, User Manual

Page: 227 / 268

Programs
To rename or move a recording
1. Select the voice recording, then tap Menu > Rename/Move .
Tip
To select multiple recordings, tap and drag over the desired recordings
or tap
Menu > Select All
. Note that you can move multiple files, but you
cannot rename multiple files simultaneously.
2.
In
Name
, enter the new voice recording name.
3.
To move the voice recording, select the new destination
Folder
and
Location
.
4.
Tap
OK
.
12.15 Voice Commander
Voice Commander
lets you make phone calls, open programs, play back
music, get calendar information, and more, just by using your voice. It
only responds to a set of predefined commands and does not allow you to
record your own commands.
This section gives a few examples on how to use Voice Commander. For
more information, see Voice Commander Help on the device. To access the
Help, tap
Start > Settings > Personal
tab
> Voice Commander Settings
then tap
Start > Help
.
To use Voice Commander
1. Tap Start > Programs > Voice Commander .
2.
You will then hear a sound, and then hold your device a few inches
away from your mouth.
3.
In a clear voice, say a command. For example, say “Help“ to ask for
information about using Voice Commander.
4. Voice Commander then asks you a question. Speak out your answer.
To place a call
You can call contacts that are stored on your device or SIM card, dial a
phone number, redial, and place a return call.
1.
Tap
Start > Programs > Voice Commander
.
2. In a clear voice, say one of the following commands:
• “Call [contact name]” to call a device contact or SIM contact.