HSR S4 Standup 2007, Service Manual

Page: 26 / 134

2.4.5. Refilling the motoroil
13. Fill oil tank with 2.5 liters of motoroil.
14. Close the oil tank with the oil dipstick.
15. Warm up the motor in a body of
water for approx. 10 minutes at
4000 - 4500 U/min.
16. Fill up the oil level with a motor
warm from operation until just
below the MAX marking.
2.5. Spark Plugs
2.5.1. Checking the spark plugs
IMPORTANT!!!
•
Socket wrench 16mm [5/8 “]
•
Feeler gauge, measurement range 0.69 mm – 0.84 mm [0.0272 - 0.0331 in.]
•
Torque wrench
•
2x spark plugs
2.5.2. Removing the spark plugs
1. Remove cable harness on the
ignition coils (1).
2. Loosen the cable harness on
the cable holders (2).
3. Remove the cable harness on the
injection valves (3).
Page 26/134