HSR S4 Standup 2007, Service Manual

Page: 124 / 134

In order to change the indicated parameter, click the button „Open“ and afterwards
“Options…” in the menu bar. Then following window will open:
Selecting the parameters
Select the parameter which you want to have. With a click on the button „Close“ you take
over the settings.
To select all parameters, you have to click on “Options” in the menu bar and then on “Select
All”. To select no one of the parameters, you have to click on “Options” in the menu bar and
then on “Disable All”.
The meanings of the abbreviations are:
ERCOUNTER..................ignition counter
RPM ................................engine speed
BAP .................................atmospherically pressure in [mbar] and/or [hPa]
MAP.................................manifold pressure in [mbar] and/or [hPa]
TARGET_MAP ................
not required
KLAMBDA .......................
not required
INJ1 .................................injection time for cylinder 1 in [ms]
INJ2 .................................injection time for cylinder 1 in [ms]
SPARK1 ..........................ignition timing for spark plug 1 in [degree]
SPARK2 ..........................ignition timing for spark plug 2 in [degree]
PHASE ............................
not required
TPS .................................throttle body position in [%]
DELTA_TPS....................
not required
Page 124/134