HSD SM 137 D, Assembly Instructions Manual

Page: 17 / 72

2 Safety information
HSD S.p.A. © - h0115k00a.fm291119
17
2 Safety information
The product will operate in safety if it is installed and used by qualified personnel in accordance
with the recommendations and instructions given in this manual or supplied by HSD's technical
engineers at the time of installation.
Tampering with the safety devices to perform unforeseen operation causes the onset of serious
danger to the operator.
The manufacturer will not be liable in any way for any damage to persons or property deriving from
the use of unqualified operators, unintended use or deliberately incorrect use of the products or
failure to comply with the safety requirements and recommendations listed below.
2.1 Safety regulations

Read the instruction manual carefully for assembly and maintenance before starting up, using,
performing maintenance or any other operation on the product.

Always comply strictly with the warning, danger and caution indications provided in the
manual, and with the safety signs affixed directly to the product.

Never work in the dark; use all the available lights and make sure that they are efficient.

Pay all due attention to what you are doing and take the necessary precautions before doing
anything.

Be careful, during the electrical installation, to not invert the phases.
2.2 Safety warnings for maintenance

In order to be able to work in complete safety on a product already installed on a machine,
refer to the machine's instruction manual.

It is strictly forbidden to work with powered up parts.
Isolate the product from the mains power supply before proceeding with any maintenance
operations.

Even though the product has been disconnected from the mains power supply, the rotating
and mobile parts may still be in motion due to inertia. Therefore, prior to carrying out any
maintenance operations, make sure that the rotating and mobile parts of the product are
stationary.