HSB Gamma 120-ZSSD, Original Assembly And Maintenance Instructions, Page: 6 / 22

Safety
4
2018-06-11 FM 169 A&M Instr. for Gamma type Z..D Rev.01
distributed by
1.6 Changes to the linear unit
Rebuilding and
modifying There are to be no changes, either structural or safety-related, carried
out on the linear unit without the prior written agreement of HRB. We
accept no liability for any unauthorised changes carried out on the unit.
The operator may only carry out the maintenance and repair work
specified in these Operating Instructions. Any further work involving the
replacement of wearing or spare parts may only be carried out following
consultation with our service technicians and by the service technicians
themselves or by HRB.
Never remove or decommission any safety or protection devices.
Follow the assembly instructions supplied by the manufacturer when
using special attachments.
1.7 Requirements for personnel
The linear unit is manufactured using state-of-the-art technology and in
compliance with the recognised safety standards. However, there are
still risks associated with its use. Therefore, only qualified and trained
personnel are permitted to assemble and operate the unit.
Any person involved in the assembly, operation, maintenance, repair or
disassembly of a linear unit must have read and understood these
instructions, in particular the first section entitled "Safety".
Any work involving live parts may only be carried out by trained
electricians. This work involves, for example:

installation of safety limit switches,

attachment of a drive,

checking the direction of the drive rotation.