HSB Gamma 120-ZSSD, Original Assembly And Maintenance Instructions, Page: 20 / 22

Maintenance
18
2018-06-11 FM 169 A&M Instr. for Gamma type Z..D Rev.01
distributed by
Lubrication plan for lubrication point F
Guide carriage size Lubrication interval Amount of
grease [cm³] per
guide carriage
Type of grease
15 with ball chain
approx. 5,000 km*
approx. 0.4 Grease in accordance with
DIN51825-KPE1R-20, e.g.
Klüberplex BE 31-102

Please take note of
the instructions
provided by the
lubricant manufacturer
should a different type
of grease be used!

Grease with a solid
lubricant component
(e.g. graphite, MoS2)
is not to be used!
20 with ball chain approx. 0.6
25(L) with ball chain approx. 1.2
35 with ball chain approx. 1.7
15 without ball chain
approx. 2,000 km*
approx. 0.8
20 without ball chain approx. 1.4
25(L) without ball chain approx. 2.8
35 without ball chain approx. 4.4
*Or at least twice a year. The lubrication interval depends on the environmental conditions and the load. Relubrication
“in motion”!
Figure 6: Relubrication intervals for the linear guide system with ball chain
Degree of
contamination
Load
high
medium
low
heavy contamination
(swarf, coolant)
medium contamination
slight contamination
(assembly hall)
no contamination
(lab, measuring rooms)