Assembly and Alignment
FM 169 A&M Instr. for Gamma type Z..D Rev.01
2018-06-11
13
distributed by
Proceed as follows:
1.
Place the motor and the coupling elements in the mounting position
alongside the linear unit.
2.
Check the direction of rotation of the motor. If necessary, adjust the
direction of rotation.
3.
If the coupling diameter is smaller than the D measurement at the
motor mounting (4), first mount the coupling half 1 (1) (bore flush
with the drive shaft) and then the motor mounting (4)
(Figure 3).
If the coupling diameter is larger than the D measurement at the
motor mounting (4), first mount the motor mounting (4) and then the
coupling half 1 (1) (bore flush with the drive shaft). Tighten the
coupling clamping screw using the mounting bore at the motor
mounting (4).
4.
If necessary, push the coupling collar (2) onto the coupling.
5.
Fix the coupling half 2 (3) to the motor journal.
6.
Attach the motor to the motor mounting.
Summary of Contents for Gamma 120-ZSSD
Page 2: ......