6
Note: Be
very careful
not to cross-thread the threaded struts or fasteners. All
parts should thread in easily. If one does not, back it out and start it in again.
Never force a threaded connection. If a part does not thread on easily, contact
HRS or your local retail facility for assistance. Apply torque only when instructed
and only after all the fasteners at each step are in place.
Step 3.
Slide a polymer ring over each of the threaded studs (Picture 3). Push
down until the polymer ring is seated in the groove on the Support Brace.
Picture 3
Step 4.
Apply 4-5 drops of the 3-in-1 oil supplied with the unit to the top few
threads on each stud (Picture 4).
Picture 4
