11
You are now ready to level the SXRC frame. Place a level on one of the top Cross
Members. Loosen the Stand Points as required so that they all contact the floor.
Make sure you do not rotate the Stand Points out more than 4-5 complete
rotations. The Stand Points must have 3 complete rotations of engagement
remaining with the threaded strut for proper performance and strength. If more
adjustment is required use a shim under the Stand Points so that the additional
travel is achieved without violating the 3 full thread minimum engagement
requirement. Now bring down the rest of the Stand Points so that they are in
contact with the floor.
After the stand frame is level, hold the Stand Points with one hand and screw the
Washer with your other hand down until it touches the top of the Stand Point.
Torque the Washer against the Stand Point as much as possible with your hands.
You can use the HRS Grip Pad if you need to get additional torque. This will lock
the Stand Points into place and take any motion out of threaded connection. The
result should be a very stable, firm, and level frame structure.
