•
• If you are installing a Smart Array P-class Gen10 controller,
connect the storage controller
.
12.
Install the controller. Make sure that the board is firmly seated in the slot.
13.
If you have installed a Smart Array P-class Gen10 controller,
connect the storage controller
backup power cable to the riser board
.
14. Install the primary riser cage
on page 30.
15.
Do one of the following:
•
Install the secondary riser blank
on page 26.
•
Install the secondary riser cage
on page 28.
16. Connect the Smart Array controller cables to the bayonet board
17.
If removed,
.
on page 22.
19. Install the server into the chassis
on page 20.
20.
Connect all peripheral cables to the server.
21.
To enable HPE Smart Array SR SmartCache or HPE Smart Array MR CacheCade in a Smart Array
P-class Gen10 controller, install an energy pack.
SmartCache and CacheCade enable solid-state drives to be used as caching devices for hard drive
media. These features accelerate access to frequently used data by caching hot data from the hard
drives onto the solid-state drives.
For more information, see the chassis user guide on the Hewlett Packard Enterprise website (
www.hpe.com/info/DX2000Gen10-docs
22. Configure the HPE Smart Array Gen10 controller
.
The installation is complete.
Hardware options installation
57
