4.
on page 21.
5.
If a secondary riser option is installed,
.
6.
Remove the secondary PCIe riser blank
.
7.
Install the secondary riser cage. Make sure that the riser board is firmly seated in its system board
connectors.
8.
If you are planning to install an expansion board in this riser cage,
9.
If removed,
.
on page 22.
11. Install the server into the chassis
on page 20.
12.
Connect all peripheral cables to the server.
The installation is complete.
Expansion board options
Installing an expansion board in the primary riser cage
The primary riser slot only supports low-profile expansion boards. For more information on this riser
option, see
Primary riser board components
on page 15.
CAUTION:
The maximum inlet ambient temperature for most components installed in the system is
35°C (95°F). Some components, however, are subject to thermal limitations depending on the
chassis model and the fan configuration. There are some hardware configurations where it is
necessary to limit the number of drives installed in the chassis. For more information, see
.
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Hardware options installation
49
