9.
Install the FlexibleLOM riser cage
10.
If removed,
.
on page 22.
12. Install the server into the chassis
on page 20.
13.
Connect the LAN segment cables to the adapter.
14.
Connect all peripheral cables to the server.
The installation is complete.
Installing the Omni-Path Architecture adapter option
Prerequisites
Before installing this option:
• Verify that an Intel Xeon 61XXF processor is installed in the processor socket 1.
• Verify that the server has at least 32 GB memory capacity.
• Make sure that you have a T-15 Torx screwdriver available.
Procedure
1.
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis
on page 19.
4.
on page 21.
5.
If a secondary riser option is installed,
.
6.
Do one of the following:
Hardware options installation
65
