•
Remove the secondary riser blank
on page 24.
•
Remove the secondary riser cage
on page 27.
7.
Install the primary riser cage. Make sure that the riser board is firmly seated in its system board
connector.
8.
If you are planning to install an expansion board in this riser cage,
9.
Do one of the following:
•
Install the secondary riser blank
on page 26.
•
Install the secondary riser cage
on page 28.
10.
If removed,
.
on page 22.
12. Install the server into the chassis
on page 20.
13.
Connect all peripheral cables to the server.
The installation is complete.
Installing the secondary riser cage option
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1.
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis
on page 19.
48
Hardware options installation
