400
# (In IRF mode.) Display detailed information about all diagnostic tests on card 1 of IRF member
device 1.
<Sysname> display diagnostic content chassis 1 slot 1 verbose
Diagnostic test suite attributes:
#B/*: Bootup test/NA
#O/*: Ondemand test/NA
#M/*: Monitoring test/NA
#D/*: Disruptive test/Non-disruptive test
#P/*: Per port test/NA
#A/I/*: Monitoring test is active/Monitoring test is inactive/NA
Chassis 1 slot 1:
Test name : HGMonitor
Test attributes : **M*PI
Test interval : 00:00:10
Min interval : 00:00:10
Correct-action : -NA-
Description : A Real-time test, disabled by default that checks link status between
ports.
exec : -NA-
Table 88 Command output
Field Description
B/* Boot-up/Not
boot-up.
O/* On-demand/Not
on-demand.
M/* Monitoring/Not
monitoring.
D/* Disruptive/Non-disruptive.
P/* Port-related/Not port-related.
A/I/*
Active and monitoring/Inactive and monitoring/Not monitoring.
Test name
Name of the diagnostic test.
Test attributes
Attributes of the diagnostic test. The characters from left to right indicate whether or not
the test is boot-up, on-demand, monitoring, disruptive, port-related, or active. The
asterisks (*) indicate that the test does not have the corresponding attributes.
Test interval
Execution interval for the test. If the execution interval for the test is not set,
–NA–
is
displayed.
Min interval
Minimum execution interval for the test. If the test does not have a minimum execution
interval,
–NA–
is displayed.
Correct-action
Correcting action triggered by failure of the test.
Description
Description for the test.
exec
Path for the Tcl script bound to the diagnostic test. If the diagnostic test is not bound to
any Tcl script,
–NA–
is displayed.
display diagnostic event-log
Use
display diagnostic event-log
to display GOLD log entries.
