Message
Meaning
I/F configured with IP
ip-address
on vid
vlan-id
(
counter
)
Indicates that the interface (VLAN) has been
configured with the indicated IP address. At boot-up
or when an IP address is changed, the switch
generates this message for each PIM-configured
VLAN.
I/F removal with IP
ip-addr
on vid
vlan-
id
(
counter
)
Indicates that a PIM interface (VLAN) has been
removed from the router as a result of an IP
address change or removal.
MCAST flow
multicast-address
source-address
not rteing
(rsc low) (
counter
)
The indicated multicast flow is not routing. The
routing switch is low on memory resources as a
result of too many flows for the number of
configured VLANs. Remedies include one or more
of the following:
• Reduce the number of configured VLANs by
moving some VLANs to another router.
• Free up system resources by disabling another
feature, such as one of the spanning-tree
protocols or either the RIP or the OSPF routing
protocol. (Unless you are using static routes, you
will need to retain a minimum of one unicast
routing protocol.) Another option that may help is
to reduce the number of configured QoS filters.
• Move some hosts that create multicast demand
to another router.
MCAST MAC add for
mac-address
failed (
counter
)
Indicates a hardware problem. Check the cabling
and router ports.
Multicast Hardware Failed to
Initialize (
counter
)
Indicates a hardware failure that halts hardware
processing of PIM traffic. The software will continue
to process PIM traffic at a slower rate. Contact your
customer care center.
No IP address configured on VID
vlan-id
(
dup-msg-cnt
)
PIM has detected a VLAN without an IP address.
Configure an IP address on the indicated VLAN.
Table Continued
Chapter 3 PIM-DM (Dense Mode)
81
