<2-3>
: The protocol version to use; the default is 2.
no
: resets the version to 2.
ip igmp last-member-query-interval
Syntax
ip igmp last-member-query-interval
no ip igmp last-member-query-interval
Parameters
<1-2>
: The number of seconds between successive group-specific query messages; the default is 1.
The
no
version resets the value to its default value of 1 second.
ip igmp querier
By default, IGMP querier is enabled. To disable querier functionality, use the following command:
Syntax
ip igmp querier
Parameters
interval
: Sets the interval in seconds between IGMP queries; the default is 125.
ip igmp query-max-response-time
Syntax
ip igmp query-max-response-time
no ip igmp query-max-response-time
Parameters
<10-128>
: The number of seconds to wait for a response to a query; the default value is 10.
The
no
version resets the value to its default value of 10 seconds.
ip igmp robustness
Syntax
ip igmp robustness
no ip igmp robustness
Parameters
<1-8>
: The number of times to retry a query; the default is 2.
The
no
version resets the value to its default value of 2.
show ip igmp
This command is used to show IGMP information for all VLANs
Syntax
show ip igmp
Example output
44
Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08
