IMPORTANT:
When you replace a transceiver with another of a different type, the server might
retain selected port-specific configuration settings that were configured for the replaced transceiver.
Be sure to validate or reconfigure port settings as required.
Prerequisites
Before installing a transceiver, be sure to read the following:
• If you are installing the transceiver spare in the QSFP port of the OCP network adapter, review the
temperature requirements for this configuration
.
• Transceiver documentation for specific operational and cabling requirements.
Procedure
1.
Disconnect the network cable from the transceiver.
2.
Slide the transceiver out of the SFP+ or QSFP port.
See the transceiver documentation for model-specific release mechanism for removing the
transceiver.
To replace the component, reverse the removal procedure.
Removing and replacing a bayonet board
CAUTION:
Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Removal and replacement procedures
31
Summary of Contents for AR64z
Page 18: ...18 Customer self repair...
Page 19: ...Customer self repair 19...
Page 20: ...20 Customer self repair...
