Procedure
on page 23.
2.
Disconnect all peripheral cables from the server.
on page 24.
4. Remove the rear expansion cage cover
.
5.
Remove the PCI air baffle.
To replace the component, reverse the removal procedure.
Removing and replacing an expansion board from the
front PCIe riser slot
CAUTION:
Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
CAUTION:
To prevent improper cooling and thermal damage, the GPU blank or an expansion board
must always be installed in the front PCIe riser slot. Do not operate the server unless this thermal
requirement is met.
Procedure
on page 23.
2.
Disconnect all peripheral cables from the server.
on page 24.
4. Remove the front expansion cage cover
.
5.
Disconnect any internal cables that are connected to the expansion board.
6.
Remove the expansion board.
Removal and replacement procedures
33
Summary of Contents for AR64z
Page 18: ...18 Customer self repair...
Page 19: ...Customer self repair 19...
Page 20: ...20 Customer self repair...
