To replace the component, reverse the removal procedure.
Removing and replacing an expansion board from the rear
PCIe riser slot
CAUTION:
Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
CAUTION:
To prevent improper cooling and thermal damage, the PCI air baffle or an expansion
board must always be installed in the rear PCIe riser slot. Do not operate the server unless this
thermal requirement is met.
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
on page 23.
2.
Disconnect all peripheral cables from the server.
on page 24.
4. Remove the rear expansion cage cover
.
5.
Remove the PCI air baffle.
34
Removal and replacement procedures
Summary of Contents for AR64z
Page 18: ...18 Customer self repair...
Page 19: ...Customer self repair 19...
Page 20: ...20 Customer self repair...
