Disconnecting and replacing the SUV cable
Procedure
1.
Disconnect the peripheral devices connected to the SUV cable.
2.
Disconnect the SUV cable:
a.
Press and hold both sides of the SUV connector.
b.
Disconnect the cable from the SUV port.
To replace the component, reverse the removal procedure.
Removing and replacing a transceiver
CAUTION:
Supported transceivers can be hot-swapped—removed and installed while the server is
powered-on. However, to prevent potential damage to the transceiver or the fiber-optic cable,
disconnect the cable from the transceiver before hot-swapping it.
CAUTION:
Do not remove and install transceivers more often than is necessary. Doing so can
shorten the useful life of the transceiver.
30
Removal and replacement procedures
Summary of Contents for AR64z
Page 18: ...18 Customer self repair...
Page 19: ...Customer self repair 19...
Page 20: ...20 Customer self repair...
