Utilities
SAS disk setup
Using the
saupdate
command
The
saupdate
command is used to query or change the mode of the Smart Array P410i and Smart Array
P411 controllers to HBA or RAID. Querying or changing modes is not supported for other controllers.
The newly added commands to SAUPDATE are:
• Get Mode
• Set Mode
Get mode
This command displays the current mode of the controllers.
Syntax
saupdate get_mode <controller>
<controller> can be any one of the following strings.
Table 46: <controller> strings
<controller>
Meaning
<seg:bus:dev:func
>
A controller having the PCI segment id, bus id, device id and function id is
addressed
all
Addresses all controllers in the system
<model>
Controllers of a particular type indicated by the <model> string are addressed
Utilities
181
