Cable management arm with right-hand swing
NOTE:
To access some components, you might have to remove the cable management arm.
To access the product rear panel components, open the cable management arm:
Procedure
1.
Power off the server (
2.
Swing open the cable management arm.
3.
Remove the cables from the cable trough.
4.
Remove the cable management arm.
Removing and replacing a power supply blank
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
To remove the component:
144
Cable management arm with right-hand swing
