HP ZBook 15 User Manual Download Page 22

Page: 22 / 111

Component

Description

(1)

Internal microphones (2)

Record sound.

(2)

Webcam light

On: The webcam is in use.

(3)

Webcam

Records video and captures photographs. Some models allow

you to video conference and chat online using streaming video.

For information on using the webcam, select Start > All

Programs > Communication and Chat > HP WebCam.

(4)

WLAN antennas (2)* (select models only)

Send and receive wireless signals to communicate with wireless

local area networks (WLAN).

(5)

Internal display switch

Turns off the display or initiates Sleep if the display is closed

while the power is on.

NOTE:

The display switch is not visible on the outside of the

computer.

*The antennas are not visible on the outside of the computer. For optimal transmission, keep the areas immediately around

the antennas free from obstructions. To see wireless regulatory notices, see the section of the

Regulatory, Safety, and

Environmental Notices

that applies to your country or region. To access the user guides, select Start > Help and Support >

User Guides.

12 Chapter 2 Getting to know your computer

Summary of Contents for ZBook 15
















































































































Search results

Summary of Contents for ZBook 15

Reviews:

Related manuals for ZBook 15

Brands by name

Popular brands

HP ZBook 15, User Manual

Search results

Summary of Contents for ZBook 15

Reviews:

Related manuals for ZBook 15

Brands by name

Popular brands