5.
Set the hard drive in the carrier at an angle. Carefully separate the lower hard drive carrier rails
, and then lower the drive between them as shown in the following figure.
Align the carrier pins with the drive mounting holes and release the rails to secure the lower-end
of the drive in place.
Figure 5-43
Installing the drive in the carrier
6.
Carefully separate the upper hard drive carrier rails
2
, and then rotate the drive upright , as
shown above.
Align the carrier pins with the drive mounting holes and release the rails to secure the upper-end
of drive in place.
110 Chapter 5 Replacing components
ENWW
