Disassembly order
Use the following table to determine the sequence in which to remove major workstation components.
Table 5-5
Workstation component disassembly order
Predisassembly (
Predisassembly procedures on page 57
)
Security lock (
Security lock (Padlock loop) (optional) on page 59
Side access panel (
Side access panel on page 61
)
Hood Sensor (
Hood Sensor (Smart Cover Sensor) (optional) on page 63
)
Smart Cover Lock solenoid (
Smart Cover Lock solenoid (optional) on page 63
)
Front bezel (
Front bezel on page 64
)
Bezel blanks (
Bezel blanks on page 65
)
Front panel I/O device assembly (
Front panel I/O device assembly
on page 66
)
Power button assembly (
Power button assembly on page 68
)
Optical drives (
Optical drive (minitower configuration) on page 87
,
Optical drive (desktop configuration) on page 90
Diskette drive (
Diskette drive (optional) on page 92
)
System speaker (
System speaker on page 69
)
Power supply (
Power supply on page 70
)
System fan (
System fan assembly on page 71
)
PCI card guide and front fan (optional) (
Front PCI card guide and fan removal
(optional) on page 83
)
Memory (
Memory on page 72
)
PCI retainer (
PCI card support bracket on page 76
)
PCI slots (
PCI card slots on page 76
)
PCI Express card (
PCI Express cards on page 78
)
PCI card (
PCI card on page 80
)
Hard drives (
SAS hard drive on page 93
),
SATA hard drive on page 97
)
Processor heatsink (
Processor heatsink on page 101
)
Processor (
System processor on page 103
)
System board (
System board on page 105
)
Battery
(
Battery on page 84
)
Security lock (Padlock loop) (optional)
If a security padlock is installed on your workstation, remove it before servicing the workstation.
ENWW
Removing and replacing components
59