HP VL600 - Vectra - 128 MB RAM, User Manual

Page: 15 / 74

15
1 Setting Up and Using Your PC
Connecting an External SCSI Accessory (Some Models Only)
Connecting an External SCSI Accessory
(Some Models Only)
Your PC may be equipped with an Ultra2 LVD/SE 16-bit SCSI connector
for external SCSI devices.
An external SCSI device is connected as follows:
1 Set an unused SCSI address to the external device.
Refer to the manual provided with the SCSI accessory for
instructions on selecting a SCSI address.
2 Make sure the SCSI device is terminated correctly (refer to the
manual provided with the SCSI accessory).
The total length of the
external SCSI cables
should not exceed 3 meters
(approximately 10 feet).
Make sure the SCSI
accessory is terminated
Desktop