HP Vectra XU 6/XXX, User Manual

Page: 82 / 168

3 How to Install Accessories Inside Your PC
Installing a Processor
70 English
Completing the Installation of a Processor
1 Verify that the system board bus speed switches are correctly
configured for the processor.
NOTE If two processors are installed, both must operate at the same bus speed
and processor speed. Refer to the manual supplied with the processor
to verify which bus and processor speeds are supported.
Note that you must configure your operating system to use the second
processor. Some operating systems do not support two processors.
2 Install any other accessories before completing the installation of the
processor.
3 Replace the cover (see page 40).
4 Turn on the computer and check that the new processor is
recognized by the power-on system-test.
Switch 4 Switch 5 Switch 6 Switch 7 Switch 8 Bus
Speed Processor
Speed
ON OFF ON OFF OFF 60 MHz 150 MHz
ON OFF OFF ON OFF 60 MHz 180 MHz
OFF OFF OFF ON OFF 66 MHz 200 MHz
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8