HP Vectra XU 6/XXX, User Manual

Page: 45 / 168

English 33
2 Using Your PC
Using Your CD-ROM Drive
WARNING To avoid electrical shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The CD-ROM drive should be
serviced by service personnel only. Do not attempt to make any
adjustment of the unit.
Loading a CD
1 Press the Open/Close button to open the CD drawer.
2 Place the CD, label side facing up, in the recess in the drawer.
3 Press the Open/Close button to close the drawer. The drawer can
also be closed by gently pushing the drawer back into the drive.
4 To remove the CD, press the Open/Close button to open the drawer.
Remove the CD. Press the Open/Close button to close the drawer.
Ejecting a CD When the Open/Close Button is Disabled
If the Open/Close button is disabled by software or a power failure, use
this procedure to remove a CD:
1 Turn off the PC.
2 Insert a straight rod (for example, a straightened paper clip) into the
emergency eject hole next to the Open/Close button. The drawer
should eject by about 15mm.
3 Pull out the drawer by hand until the CD can be easily removed.
4 Remove the CD.
5 Push the drawer gently back into the drive.